CCNA 1 Chapter 04

Cisco CCNA1-Chapter-04  Correct Questions Answers 100%

01. Based on the transport layer header shown in the diagram, which of the following statements describe the established session? (Choose two.)

  • This is a UDP header;
  • This contains a Telnet request;
  • This contains a TFTP data transfer;
  • The return packet from this remote host will have an Acknowledgement; Number of 43693;
  • This is a TCP header.

02.  With TCP/IP data encapsulation, which range of port numbers identifies all well-known applications?

  • 0 to 255;
  • 256 to 1022;
  • 0 to 1023;
  • 1024 to 2047 ;
  • 49153 to 65535 ;

03. Why are port numbers included in the TCP header of a segment?

  • to indicate the correct router interface that should be used to forward a segment;
  • to identify which switch ports should receive or forward the segment;
  • to determine which Layer 3 protocol should be used to encapsulate the data;
  • to enable a receiving host to forward the data to the appropriate application;
  • to allow the receiving host to assemble the packet in the proper order.

04. Which two options represent Layer 4 addressing? (Choose two.)

  • identifies the destination network;
  • identifies source and destination hosts;
  • identifies the communicating applications;
  • identifies multiple conversations between the hosts;
  • identifies the devices communicating over the local media.

05. Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being performed?

  • session establishment;
  • segment retransmit;
  • data transfer;
  • session disconnect.

06.  Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.)

  • The local host is using three client sessions;
  • The local host is using web sessions to a remote server;
  • The local host is listening for TCP connections using public addresses;
  • The local host is using well-known port numbers to identify the source ports;
  • The local host is performing the three-way handshake with 192.168.101:1037.

07. Which information is found in both the TCP and UDP header information?

  • sequencing;
  • flow control;
  • acknowledgments;
  • source and destination port.

08. Which three features allow TCP to reliably and accurately track the transmission of data from source to destination?

  • encapsulation;
  • flow control;
  • connectionless services;
  • session establishment;
  • numbering and sequencing;
  • best effort delivery.

09. Which is an important characteristic of UDP?

  • acknowledgement of data delivery;
  • minimal delays in data delivery;
  • high reliability of data delivery;
  • same order data delivery.

10. After a web browser makes a request to a web server that is listening to the standard port, what will be the source port number in the TCP header of the response from the server?

  • 13;
  • 53;
  • 80;
  • 1024;
  • 728.

11. Which event occurs during the transport layer three-way handshake?

  • The two applications exchange data;
  • TCP initializes the sequence numbers for the sessions;
  • UDP establishes the maximum number of bytes to be sent;
  • The server acknowledges the bytes of data received from the client.

12. Why is flow control used for TCP data transfer?

  • to synchronize equipment speed for sent data;
  • to synchronize and order sequence numbers so data is sent in complete numerical order;
  • to prevent the receiver from being overwhelmed by incoming data;
  • to synchronize window size on the server;
  • to simplify data transfer to multiple hosts.

13. Which transport layer protocol provides low overhead and would be used for applications which do not require reliable data delivery?

  • TCP;
  • IP;
  • UDP;
  • HTTP;
  • DNS.

14. During a TCP communication session, if the packets arrive to the destination out of order, what will happen to the original message?

  • The packets will not be delivered;
  • The packets will be retransmitted from the source;
  • The packets will be delivered and reassembled at the destination;
  • The packets will be delivered and not reassembled at the destination.

15. What mechanism is used by TCP to provide flow control as segments travel from source to destination?

  • sequence numbers;
  • session establishment;
  • window size;
  • acknowledgments.

16.  Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process, Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will Server 1 take as a result?

  • create a Layer 1 jam signal ;
  • reach a timeout and resend the data that needs to be acknowledged;
  • send a RESET bit to the host;
  • change the window size in the Layer 4 header.

17. What is dynamically selected by the source host when forwarding data?

  • destination logical address;
  • source physical address;
  • default gateway address;
  • source port.

18. Which OSI model layer is responsible for regulating the flow of information from source to destination, reliably and accurately?

  • application;
  • presentation;
  • session;
  • transport;
  • network;

19.  Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN message to begin session establishment. What happens next?

  • Host1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2;
  • Host1 sends a segment with the ACK flag = 1, SYN flag = 0 to Host2;
  • Host1 sends a segment with the ACK flag = 1, SYN flag = 1 to Host2;
  • Host2 sends a segment with the ACK flag = 0, SYN flag = 1 to Host1;
  • Host2 sends a segment with the ACK flag = 1, SYN flag = 0 to Host1;
  • Host2 sends a segment with the ACK flag = 1, SYN flag = 1 to Host1.

20. What are two features of the User Datagram Protocol (UDP)? (Choose two.)

  • flow control;
  • low overhead;
  • connectionless;
  • connection-oriented;
  • sequence and acknowledgement.

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s